Problems with the toilet are unpleasant, but they cannot be postponed. Sometimes you can do with a simple repair, but there are cases when replacing the toilet becomes the only solution.
When is it worth doing repairs, and when is it better to replace the toilet?
Toilet repair is always cheaper than a complete replacement, but it is not always justified. Here are a few signs when repairs will help:
- Leaks from the tank due to worn gaskets.
- Poor water supply, blockage in the drain valve.
- The toilet bowl is swinging due to loose bolts.
If the problem boils down to a small repair, for example, replacing the tank fittings, then you can do without buying a new toilet. However, there are situations when repairs will not help, and it is better to replace the equipment immediately:
- Cracks in ceramics. Even small chips can lead to serious leaks.
- An old structure that consumes too much water. Modern models are more economical.
- The appearance of rust and other irreversible damage.
In cases where repair costs are too high or the toilet often fails, it is more rational to think about replacing it.
Stages of toilet bowl replacement: what should be considered in advance?
If the decision is made in favor of a replacement, it is important to prepare in advance to avoid unnecessary problems. Here are the basic steps:
- Choosing a new toilet. Make sure that the selected model is suitable for an existing sewer system.
- Preparation of tools. You will need a wrench, a sealant, a screwdriver, rags and a container for draining water.
- Turning off the water supply. Be sure to turn off the water before starting work to avoid leaks.
- Removing the old toilet bowl. After turning off the water, unscrew the bolts connecting the toilet to the floor and carefully remove the old unit.
- Installing a new one. Before installation, apply sealant to the junction with the sewer. After fixing the structure, check if water is leaking.
If these stages are in doubt, it is better to contact specialists. Niagara toilet repair and replacement services include both minor repairs and complete equipment replacement, which avoids mistakes and saves time.
What should I pay attention to when installing it myself?
If you decide to replace the toilet yourself, here are some important points:
- Proper connection to the sewer system. Make sure that all joints are sealed, otherwise unpleasant odors or leaks may appear.
- Smooth mounting. The toilet bowl should stand straight and firmly. Even a slight rocking will lead to the destruction of the sealant and leaks.
- Checking the tank fittings. Make sure that the drain mechanism works smoothly and without interruptions. This will help to avoid excessive water consumption.
- Self-installation requires attention and care. If difficulties arise, it is better to contact specialists to avoid mistakes. Companies engaged in toilet repair and replacement Niagara can offer a quick and high-quality solution.
How to take care of the toilet after repair or replacement?
After a new toilet is installed or the old one is successfully repaired, it is important to monitor its condition in order to avoid new problems. Some useful tips:
- Regular cleaning. Use a brush and cleaning products to prevent plaque and blockages.
- Check the sealant. Inspect the seams and joints from time to time to notice the damage in time.
- Water flow control. Adjust the tank fittings so as to avoid excessive water consumption.
- Preventive replacement of gaskets. Even if there are no leaks, it is better to change gaskets and seals every couple of years.
Proper care will prolong the service life of the equipment and reduce the likelihood of breakdowns.
As a result, the repair and replacement of the toilet is a task that requires a responsible approach. If the problem is small, you can solve it yourself. But in difficult situations, such as cracks or complex leaks, it is better to trust the professionals. This will save not only time, but also nerves.
